BeeProg3
|
|
Ultra speed universal 64-pindrive programmer,
design focused on high-capacity memories programming.
Short description:
the BeeProg3 was designed meticulously with attention to details, quality and reliability
the programmer perfectly fits for high-demanding desktop programming, as well as for automated programming systems
based on a state of the art FPGA design, powerful ARM processor and internal SSD, the BeeProg3 is ready to program devices at theoretically possible speeds
64-pins rich-features, precise and powerful pindriver provides programming signals for every technology of programmable devices
logic signals frequency up to 125MHz at 3.3V and 80MHz at 5V
it supports devices with VCC voltages as low as 0.8V
ultra fast programming speed, one of the fastest programmers worldwide. Sustainable programming speed greater than 22.5 MBytes per second
the 2 GB eMMC NAND Flash could be done in less than 100 sec, if supported memory is fast enough
it utilizes both universal programming modules, dedicated for IC package type and specialized modules, designed optimized for specific device families
ESD protection on each pin of the pindriver
dual connection to the PC: USB (2.0 HighSpeed) and LAN (100 Mbit)
comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 8.1 (32-bit and 64-bit)
unique quick reaction to customer's needs - software update can be ready within a day from request, by OnDemand software
Multiprogramming possible by attaching more programmers to one PC
developed and made in Slovakia
Warranty - 3 years
the BeeProg3 was designed meticulously with attention to details, quality and reliability
the programmer perfectly fits for high-demanding desktop programming, as well as for automated programming systems
based on a state of the art FPGA design, powerful ARM processor and internal SSD, the BeeProg3 is ready to program devices at theoretically possible speeds
64-pins rich-features, precise and powerful pindriver provides programming signals for every technology of programmable devices
logic signals frequency up to 125MHz at 3.3V and 80MHz at 5V
it supports devices with VCC voltages as low as 0.8V
ultra fast programming speed, one of the fastest programmers worldwide. Sustainable programming speed greater than 22.5 MBytes per second
the 2 GB eMMC NAND Flash could be done in less than 100 sec, if supported memory is fast enough
it utilizes both universal programming modules, dedicated for IC package type and specialized modules, designed optimized for specific device families
ESD protection on each pin of the pindriver
dual connection to the PC: USB (2.0 HighSpeed) and LAN (100 Mbit)
comfortable and easy to use control program, works with all versions of MS Windows from Windows XP to Windows 8.1 (32-bit and 64-bit)
unique quick reaction to customer's needs - software update can be ready within a day from request, by OnDemand software
Multiprogramming possible by attaching more programmers to one PC
developed and made in Slovakia
Warranty - 3 years
I.C. Tester
- TTL type: 54,74 S/LS/ALS/H/HC/HCT series
- CMOS type: 4000, 4500 series
- Static RAM: 6116 .. 624000
- User definable test pattern generation
- package support includes DIP, SDIP, PLCC, JLCC, SOIC, SOP, PSOP, SSOP, TSOP, TSOPII, TSSOP, QFP, PQFP, TQFP, VQFP, QFN (MLF), SON, BGA, EBGA, FBGA, VFBGA, UBGA, FTBGA, LAP, CSP, SCSP, LQFP, MQFP, HVQFN, QLP, QIP etc.
|
|
|
Package includes
BeeProg3 programmer
power cord (Europe / USA / Japan)
connection cable PC-programmer, USB port
diagnostic pod for selftest of the programmer and test of the calibration (AP3 diagnostic pod, 1x)
programming module fixating screw (1x)
quick start guide
CD with software and user's manual
calibration test report
sticker "register your programmer" (1x)
information leaflet "Notes about ESD" (1x)
transport case (cardboard box)
BeeProg3 programmer
power cord (Europe / USA / Japan)
connection cable PC-programmer, USB port
diagnostic pod for selftest of the programmer and test of the calibration (AP3 diagnostic pod, 1x)
programming module fixating screw (1x)
quick start guide
CD with software and user's manual
calibration test report
sticker "register your programmer" (1x)
information leaflet "Notes about ESD" (1x)
transport case (cardboard box)
