How to Unlock BMW G-Series Instrument Cluster for Speeds Over 260 KM/H (2022+ Models)

How to Unlock BMW G-Series Instrument Cluster for Speeds Over 260 KM

If you own a BMW G-Series model manufactured after March 2022, you’ve probably noticed the digital instrument cluster caps out at 260 km/h, even if your vehicle’s true performance potential exceeds that limit. In this guide, we’ll walk you through the exact steps to unlock your BMW's instrument cluster using ESYS and Tool32—two essential tools for professional-level BMW coding and flashing.
This procedure is especially relevant for enthusiasts and tuners who want their display to match the vehicle’s actual capability after performance upgrades or limiter removals.

🚗 Why Your BMW Cluster Is Capped at 260 KM/H
BMW digitally restricts the displayed speed in many models, not for mechanical reasons, but for market or regulatory compliance. The hardware and software are fully capable of showing higher speeds, but the instrument cluster is factory-limited.
Unlocking this feature doesn’t just look impressive—it also restores real-time accuracy when tracking top speeds, especially after ECU tuning or performance enhancements.

🛠 Tools You Need
Before you begin, make sure you have the following:

• ✅ ESYS software (latest version)
• ✅ Tool32 (part of Ediabas suite)
• ✅ ENET cable or ICOM interface
• ✅ Stable 13.8V power supply (very important!)
• ✅ Laptop with Windows OS
• ✅ Optional: BMW Esys launcher with token

🔧 Step-by-Step Guide to Unlock Cluster Speed Display
🔹 Step 1: Establish Connection via ESYS

1. Connect your ENET/ICOM cable to the car and your laptop.
2. Turn on ignition (engine OFF).
3. Open ESYS, select the correct PSdZData version, and identify the vehicle (e.g., G20, G30, G05).
4. Read the FA (Vehicle Order) and identify the KOMBI / DKOMBI / Instrument Cluster ECU.

🔹 Step 2: Backup the Original Coding
Before making changes:

• Right-click the cluster ECU.
• Select "Read Coding Data" and save the file as a backup.

🔹 Step 3: Use Tool32 to Access Advanced Parameters

1. Open Tool32.
2. Load the ECU job file for your cluster. This might be named something like DKOMBI.prg or similar (depends on model).
3. Locate commands such as lesen_fahrzeugdaten (read vehicle data) and steuern_schreib_xxx (write speed values).
4. Identify the max_kmh_limit or similar parameter.

⚠️ Values are often stored in HEX format. 260 km/h may appear as 0x104. To unlock, change to 0x15E (350 km/h), or your desired value.
🔹 Step 4: Write New Values Safely

• Use the correct steuern_schreib_xxx command to write the new limit.
• Ensure no CAN errors are present during writing.
• Once complete, verify using lesen_fahrzeugdaten again.

🔹 Step 5: Recode Cluster via ESYS

• Go back to ESYS and write back the coding using the modified data.
• Perform "Code Default" if needed.
• Cycle ignition OFF → wait 30 seconds → ON.

✅ Final Checks & Testing

1. Drive safely in a controlled environment (test track or dyno).
2. Observe the instrument cluster—it should now display speeds beyond 260 km/h.
3. No warning lights or errors should be present. If there are, recheck Tool32 values and ensure ESYS coding completed properly.

🎓 Want to Master BMW Coding & ECU Unlocking?
Join the BMW Full Course + Coding Account for professional training and exclusive software access. Whether you're a beginner or an expert, this course gives you updates, live support, and step-by-step guides just like this one.
👉 Join BMW Course Account Here