Opel first and second generation
The main problems with these systems are as a rule, smooth discharge of the battery. Continuous discharging leads to out of sync and the immobilizer ECU .
This CHECK ENGINE light on the instrument panel blinks continuously and the engine will not start. Treatment of the problem lies in the timing and engine immobilizer unit specialized equipment.
To solve this problem, the presence of your car is not necessary. You need only to remove and bring regular immobilizer In the photo shows its location.
In some cases, you can disable the immobilizer by reprogramming the engine control unit.
The procedure to reprogram the unit is suitable when the immobilizer is out of order or lost the last chip key . Immediately it should be noted that disable immobilizer because of loss of smart key decision wrong! Firstly, in many cases, easier to program a new chip key , and secondly, do not leave the car without a full-time anti-theft system.
If you have a single key to the chip , it is possible to make a duplicate of the chip, and then paste it into a blank Rout with a place under the chip. Duplication of the electronic chip key is a lot cheaper than restoration of its loss.If you lost the last chip key , you can manually remove the immobilizer and make a new key using key programming tools
This CHECK ENGINE light on the instrument panel blinks continuously and the engine will not start. Treatment of the problem lies in the timing and engine immobilizer unit specialized equipment.
To solve this problem, the presence of your car is not necessary. You need only to remove and bring regular immobilizer In the photo shows its location.
In some cases, you can disable the immobilizer by reprogramming the engine control unit.
The procedure to reprogram the unit is suitable when the immobilizer is out of order or lost the last chip key . Immediately it should be noted that disable immobilizer because of loss of smart key decision wrong! Firstly, in many cases, easier to program a new chip key , and secondly, do not leave the car without a full-time anti-theft system.
If you have a single key to the chip , it is possible to make a duplicate of the chip, and then paste it into a blank Rout with a place under the chip. Duplication of the electronic chip key is a lot cheaper than restoration of its loss.If you lost the last chip key , you can manually remove the immobilizer and make a new key using key programming tools
Replacing the engine control unit
for OPEL cars.
When replacing the engine control unit on the block, shot from another vehicle on cars OPEL , equipped with standard anti-theft system from the second generation of the regular immobilizer must take into account the fact that the unit, which was on another vehicle must be reset, that is, to prepare for installation to another car.
When performing this procedure, you must know the secret code CAR PASS to work with the standard anti-theft system of the donor car.
NEW! Until recently, learn the secret code engine control unit, which was on the other vehicle, without additional control units, such as CIM module or combination of devices, technology allows to know CARPASS any engine control unit, which had previously stood in the other car, and RESET to make installing it on your car!
If you lose your last chip key , you can make a new key from dumps
When performing this procedure, you must know the secret code CAR PASS to work with the standard anti-theft system of the donor car.
NEW! Until recently, learn the secret code engine control unit, which was on the other vehicle, without additional control units, such as CIM module or combination of devices, technology allows to know CARPASS any engine control unit, which had previously stood in the other car, and RESET to make installing it on your car!
If you lose your last chip key , you can make a new key from dumps
Disable immobilizer Opel
In Opel cars, which is the engine control unit
BOSCH, DELCO, or SIMTEC 56.1.
You can disable immobilizer in the engine control unit. This procedure is carried out when there was out of sync with the engine control unit and immobilizer CHEK ENGINE light on the instrument panel blinks continuously.
To deactivate disable the immobilizer
BOSCH, DELCO, or SIMTEC 56.1.
You can disable immobilizer in the engine control unit. This procedure is carried out when there was out of sync with the engine control unit and immobilizer CHEK ENGINE light on the instrument panel blinks continuously.
To deactivate disable the immobilizer