CHIPLOADER
HOW TO SETUP
Download the following Software & follow instructions in Video
OR
| chipldr2270.zip |
To Learn How to Setup & Activate License
Or Follow simple instructions in the Following link
CHIPLOADER Comes with the following Adapters
DB9 USB K-Line adapter
This is a qualitative USB K-Line adapter made on the FTDI chip, which can be used for diagnostics and chip tuning of vehicles, supporting K-Line.
adapter pinout:2 Ground
|
|
Used to read\write ECUs in DESKBENCH OR TABLE
You can download the drivers for the adapter here.
| cdm20814_setup.exe |
CHIPSOFT J2534 ADAPTER IN A CASE
is a special adapter that communicates between the computer and the vehicle ECU. Usually it is a multiprotocol device that supports all the modern protocols from the vehicle ECU exchange. This protocols such as:
ISO14230
ISO9141
ISO15765
J1850PWM
J1850VPW
ISO14230
ISO9141
ISO15765
J1850PWM
J1850VPW
|
Pinout of the DB9 socket of the adapter:
1,2 - ground 3 - CAN High 4 - ISO 9141-2 K Line 5 - CAN Low 8 - ISO 9141-2 L Line 9 - +12V |
|
Used to read via OBD & Adapter can work as KLine adapter.
Shared by Mr. Tariq - Jordan
You should install this driver: http://www.chipsoft.com.ua/download/stsw-stm32102.zip
As described in instruction: http://chipsoft.com.ua/download/CHIPSOFT_J2534_Lite_en.pdf
Reading & Writing
By CHIPLOADER
Before Start working with CHIPLOADER, you need to make the following setting
CHIPLOADER MAY NOT WORK WITHOUT THESE SETTING, SO YOU SHOULD MAKE IT
Diagnostic Connector
ECU Connection
Bosch M7.9.8, MG7.9.8
Bosch Kefico M797 (+)
Siemens SIMK31 / SIMK41 / SIMK43 / SIM2K47 / Siemens (5 connectors) (Kia, Hyundai 2.7l) - OBDII
