Bosch ME 7.9.9 Chevrolet Captiva
Attention! All the programming team should always be performed with the control unit, which is transferred to the reprogramming mode other than "Connect", which is used to transfer a block of the diagnostic mode in reprogramming mode.
The loader supports reading / writing FLASH block Bosch ME7.9.9 only in "on the table" when the ECU transferred to the reprogramming mode (or so-called "bot mode").
File Size firmware FLASH Bosch ME7.9.9 - 832 KB (851,968 bytes).
To transfer control unit programming condition it must be finalized. The following photo vypayat need resistor space, highlighted in blue, and solder it in place, highlighted in red. After the operations of reading records need to rewire a resistor in place with which the sealed-off.
The loader supports reading / writing FLASH block Bosch ME7.9.9 only in "on the table" when the ECU transferred to the reprogramming mode (or so-called "bot mode").
File Size firmware FLASH Bosch ME7.9.9 - 832 KB (851,968 bytes).
To transfer control unit programming condition it must be finalized. The following photo vypayat need resistor space, highlighted in blue, and solder it in place, highlighted in red. After the operations of reading records need to rewire a resistor in place with which the sealed-off.